Electrical Engineers And Master Electricians EEAME Portal
...references, dictionary, standards, ebooks and tutorials
List of commonly used International Standards in the Electrical industry.
| Standard | Title |
|---|---|
| ANSI C37.06.1 | "'American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times' |
| ANSI C37.121 | American National Standard for Switchgear ??? Unit Substations ??? Requirements |
| ANSI C57.12.10 | American National Standard for Transformers 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing Safety Requirement |
| ANSI C57.12.20 | American National Standard for Transformers, Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and Below: Low Voltage, 7970/13800Y Volts and Below |
| API RP 14C | Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms |
| API RP 14F | Recommended Practice for Design and Installation of Electrical Systems for Fixed and Floating Offshore Petroleum Facilities for Unclassified and Class I, Division 1 and Division 2 Locations |
| API RP 14G | Recommended Practice for Fire Prevention and Control on Fixed Open-type Offshore Production Platforms |
| API RP 500 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 |
| API RP 505 | Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Division 1 and Division 2 |
| API 546 | Brushless synchronous machines 500KVA and above |
| IEC 60027 | Letter symbols to be used in electrical technology Part 1: General |
| IEC 60028 | International standard of resistance for copper-Edition 2 |
| IEC 60034 | Rotating electrical machines Part 1: Rating and performance |
| IEC 60038 | IEC standard voltages |
| IEC 60050-448 | International Electrotechnical Vocabulary Chapter 448: Power System Protection-Second Edition |
| IEC 60055-1 | Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their Accessories-Edition 5.1; Consolidated Reprint |
| IEC 60055-2 | Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 2: General and Construction Requirements-First Edition; Amendment 1: 10-1989; Amendment 2: 02-2005 |
| IEC 60063 | Preferred Number Series for Resistors and Capacitors-Edition 2 |
| IEC 60068-1 | Environmental Testing Part 1: General and Guidance-Sixth Edition; Amendment 1-1992 |
| IEC 60068-2-6 | Environmental Testing - Part 2: Tests - Test FC: Vibration (Sinusoidal)-Sixth Edition; Corrigendum 1: 03/1995 |
Our Sponsors
